What you need
Ubuntu basic knowledge
You might need Ubuntu basic knowledge to adapt the Virtual Machine to your needs.
VirtualBox
The Virtual Machine
It's an english Ubuntu Server LTS 10.04 x86 based Virtual Machine.
You will find the latest one here:
The file is compressed, you will need about 3.34Gb.
Settings
VirtualBox
Click on New to create your Virtual Machine.
The next time, you will click on Start instead.
Name your Virtual Machine, select "Linux" and "Ubuntu".
You will need about 1.5Gb of memory (RAM + swap).
By default, the Virtual Machine is using a 1Gb swap file, so you will need to declare at least 512Mb of RAM in VirtualBox.
If you want to remove or change the swap file, follow that wiki:
http://dev.ryzom.com/projects/ryzom/wiki/MemoryToBuildLinuxServer
Select the file you previously downloaded, ryzom_core_server.vdi.
Validate your Virtual Machine and click on "Settings" to change the network settings.
For "Adapter 1", select Attached to "Bridged Adapter".
Select your ethernet adapter.
Click on "Advanced" to display the advanced settings.
Set the "Mac Address" to:
080027018C16
Important notice: If you don't specify the Mac Address, the Virtual Machine will detect a new network adapter and ignore the network settings.
Logon
You can log on the Virtual Machine using:
user: ryzom
password: ryzom
If you need root access, use "sudo".
Networking
By default, the Virtual Machine is using the following static ip:
192.168.1.100
gateway:
192.168.1.1
and DNS
192.168.1.1
You can connect on the Virtual Machine using "ssh" and "sftp".
If you want to change the ip and gateway, edit:
/etc/network/interfaces
If you want to change the DNS, edit:
/etc/resolv.conf
But don't forget to update FSListenHost in:
/home/ryzom/ryzom/code/ryzom/server/frontend_service.cfg
You can use "vi" or "nano" to edit the settings.
If your network adapter is not recognized, delete the following file:
/etc/udev/rules.d/70-persistent-net.rules
and restart the Virtual Machine.
MySQL
You can access to the MySQL server using:
user: root
password: ryzom
You can use PHPMyAdmin too:
with the default ip.
Running the shard
To run the shard, connect to the Virtual Machine using the "ryzom" account, and use the following command:
shard start
Ignore the various warnings.
To stop the shard:
shard stop
To forcefully stop the Virtual Machine, click on the "Machine" menu and "Close".
Then "Power off the machine".
You can monitor your shard using the webtool:
with the default ip.
Connecting a client
If you don't have a client, download the last one (windows):
Edit client.cfg to match your server ip:
StartupHost = "192.168.1.100:40916";
with the default ip.
That's all folks!!!